天堂2 阿納金 Lineage 2 Anakim

這次製作的是 modelworks 公司的 yidao512 所建的，非常感謝他讓我有參與制作的機會。^^ 這個天堂2的人形BOSS挺漂亮的 ^^ 這次我用了160g的白紙，採取2in1的做法，也就是50%的尺寸，因爲原尺寸太大了。。。就這樣也有24cm高！

This time I am making a paper figurine origin from the famous online game Lineage2, a BOSS level character, thanks to yidao512; a very talented friend from modelworks company who design this pretty papermodel! This time I use 160g paper, and also 2 in 1 printing; which mean its only 50% of the original size. Even at half size, its 24cm tall!

殷海薩有九個兒女，每個都是天使團的領隊。亞納金是殷海薩最小的女兒，她長有三對翅膀。殷海薩視她為自己的聲音，通過她對地面萬物傳達自己意志的傳令者。亞納金是光明的代言人，拍打著白金的翅膀，在聖靈花火的包圍下，降落到地面上行使啓示的權能。。。
Einhasad had nine children and set them up as leaders of the angels. The last of the nine was Anakim, who shone with the form of a woman with three pairs of wings. Einhasad is said to have regarded her youngest daughter as her voice to carry out her will to the creatures of the land. Anakim is an agent of light, surrounded in the flames of spirits, sending down the power of reveltion to the land.

頭部，忘了拍照。。。
Forgotten to take pictures for head's making
小腿+腿部盔甲
Lower legs and armor

上半身
The upper body

雙手上的武器
Weapons on both of her hands

下半身+大腿
Lower body and legs

完成品~~~
Completed!!!

小小的三角柱，讓亞納金站立用
A small stand for Anakim

底座
The complete bBase

~~~最終作品~~~
~~~Final Product~~~

自由的雙子星(下) Twin Freedom (Part 2 of 2)

非常遺憾。。。雙手的製作過程因爲我的500GB硬盤的損壞而隨著它消失了。。。所以我也只能夠由槍以及盾牌的製程來開始分享了。。。。嗚嗚。。。
I'm very sorry, the assembling process of the hands had been lost with my dead 500GB harddisc, its always a nightmare to loss data due to hardware failure, especially new one!!! ARGH! Enough said...let's start with the guns and shields making then.....

照常的是槍的零件
Mini parts of the guns

槍把的位置需要先穿過手掌，否則就沒辦法握槍了 XD
Gotta place the handles into the palms before gluing them onto the guns, else it's impossible to squeeze the guns into those hands XD

一槍在手，天下我有~ （起笑。。。）
Gun holding pose....

盾牌的零件，非常棒的盾牌，超喜歡~

I like the shield very much, its very well-designed. ^^

帥氣的盾牌!
Aren't they look cool! muahaha

接下來就是翅膀的部分了。。。原本我已經做好了。。但是因爲其中的小零件粘錯了，導致翅膀的移動被限制了，拆除零件又比較困難（技術有限），所以就重新製作了。。。如果不是因爲這樣早在幾個星期前就可以傳上來了。。。或許也不會經歷硬盤死翹翹的意外，也不會意志消沉了那麽久了。。。唉。。。/___\
Next are the wings!!! I've actually done with the wings back about two - three week's time, but some minor parts had been wrongly glued, causing the wings to have very limited movements; hence I decided to remake new pairs of wings.....which had been delayed by the catastrophe of my harddisc failure.... >_<

翅膀其實還蠻帥的，很多地方都是無需膠水而組合的
Some parts of the wings can be assembled without glue!

翅膀的可動範圍

Moveable range of the wings

嘩啦~ ~ ~ 爲了這效果。。。我的500GB。。。。
Quite nice effect....yeah?

最後就來看看整體吧~ 說實話，可動性高的紙模型呢，玩多幾次就會松松的了。 算是紙模型的先天不足的地方吧。。。或是期待高人發明比較好的關節吧~ （不過還是喜歡可動的^^)
Frankly, movable parts of papermodels tend to loosening up after toying around with it a couple of times, no cure to it too at the moment.....It'd be great if someone can come up with better joints or moving method. ^^

口渴了。。。清涼一下。。。。

Essential during hot weathers ^^

個人表演~~~
Solo~~~

~ 完 ~
The End